My task was to plasterboard my stud infill. The first thing i done was to put on my PPE. I used goggles to protect my eyes from the plasterboard dust and gloves to protect my hands from cuts. I then got myself a measuring tape and a stanley knife and measured the width and length of my door frame, i then marked my measurements onto my plasterboard with a pencil and a spirit level to make it strait. I then cut the plasteroard with a stanley knife. After this i took it to my door frame to make sure it fit right, once i knew this i screwed it in.
You carried out the task to the tolerances given and have made a nice job of it. You could add more on how you cut and bit more on the task itself. Good blog and picture.
ReplyDeleteJohn